Discrete Event Simulation Applying Lean methodologies: Case study. Wooden Sector
Abstract
In productive processes where parts are assembled, the assembly time is one of the most important problems that should be solved. Due to this, a case study was carried out in one company in the wooden sector, in which the Lean methodologies and the Discrete Events Simulation are integrated, to evaluate and improve the assembly processes of four-input wooden stowage. This study began by validating the process, then it was simulated in the Arena software, where great variability is observed in the assembly time of the four-input pallets, obtaining an average result of 25+/- 2 minutes. Due to this reason, the use of this methodology was proposed, applying the DMAIC cycle and carrying out controls in the process, it was possible to reduce it to 19 +/- 1 minute per stowage unit assembled, which meant a 24% reduction in the time spent manufacturing. All of this positively influenced the final delivery time of the product, so, with this new time, the company could satisfy the demand of its customers, and will be able to place its product on the market in less time.Downloads
References
DANE, “Annual Manufacturing Survey,” Gobierno de Colombia, Bogotá, 2019.
I. M. Ospina, “Análisis de las PYMES del sector de muebles
en Colombia a partir del ingreso de compañías y productos
extranjeros,” http://repositorio.uniagustiniana.edu.co/, Bogotá, 2018.
P. Ostbo, R. Cattermole and M. Wetherill, Leading Beyond
Lean, P. M. UK, Ed., London: Palgrave Macmillan, 2016.
A. M. Sanchez and M. E. Rodriguez, “Propuesta de mejoramiento del proceso de atención a usuarios en un sistema con
múltiples servicios y estaciones, usando técnicas y modelos
de Simulación y su aplicación a la oficina de fianaciación y
cartera de la Pontificia Universidad Javeriana Cali,” Santiago de Cali, 2016.
A. León, “Propuesta de mejoramiento de los tiempos de respuesta del proceso de inscripción y admisión de la Pontificia Universidad Javeriana Cali aplicando la metodología
DMAIC de seis SIGMA,” vitela.javerianacali.edu.co, 2017.
S. Mohammadi-Ziabari and j. Treur, “A Modeling Enviroment for Dynamic and Adaptative Network Models Implemented in MATLAB,” Fourth International Congress on
Information and Communication Technology. Advances in
Intelligent Systems and Computing, vol. 1041, pp. 91-111,
M. Joseph Gordon Jr, Six Sigma Quality for Business and
Manufacture, Elsevier Science, 2002.
T. Waurick, Prozessreorganisation mit Lean Six Sigma,
Springer Gabler, 2014.
D. Donoho, “50 Years of Data Science,” Journal of Computational and Graphical Statistics , vol. 26, no. 4, pp. 745-766,
A. Takemura, “A new era of statistics and data science education in Japanese universities,” Japanese Journal of Statistics and Data Science, vol. 1, no. 1, pp. 109-116, 2018.
M. A. Alvarez, “https://ciateq.repositorioinstitucional.mx/
jspui/,” 2017. [Online]. Available: https://ciateq.repositorioinstitucional.mx/jspui/handle/1020/66. [Accessed 24 03
.
K. Shawki, K. Kilani and M. Gomaa, “Analysis of earthmoving systems using discrete-event simulation,” Alexandria Engineering Journal, vol. 54, no. 3, pp. 533-540, 2015.
O. J. Herrera and L. A. Becerra, “Diseño General de las
Etapas de Simulación de Procesos con Énfasis en el análisis
de Entrada,” in 12th Latin American and Caribbean Conference for Engineering and Technology, Guayaquil, 2014.
C. Harrell, Ghosh and Bowden, Simulation Using Promodel, S. Edition, Ed., McGraw-Hill, 2017.
A. Patiño, “Tendencias tecnológicas que influyen en el aumento de la productividad empresarial.,” INGE CUC, vol.
, no. 2, pp. 84-96, 2015.
E. Pineda-Ballesteros and F. R. Tellez-Acuña, “Modelling
and simulation of the Colombian cocoa production chain,”
INGE CUC, vol. 14, no. 1, pp. 141-150, 2018.
E. D. Figueroa, “Análisis correlacional de las estrategias
del mercado farmaceutico de productos antialergicos para
la mejora del mix comunicacional de los laboratorios farmaceuticos de la ciudad de Quito durante el periodo 2012-
,” Repositorio Digital Institucional BIBDIGITAL, Quito (Ecuador), 2016.
A. O. Yanza, O. Febles and V. Estrada, “Diagnosis of the
level of automation of manufacturing processes for monitoring and control in the pharmaceutical industry of Guayaquil,” International Journal of Innovation and Applied
Studies, vol. 15, no. 1, pp. 101-113, 2016.
A. Akcay and T. Martagan, “Stochastic simulation under
input uncertainty for contract-manufacturer selection in
pharmaceutical industry,” Washington, DC, USA, 2016.
E. P. Sanchez F, D. Nuñez R, R. O. Cruz L, M. A. Torrez H
and E. V. Herrera M, “Simulation and Counting of ColonyForming Units,” Revista Electrónica RECIBE ISSN: 2007-
, vol. 6, no. 1, pp. 97-111, 2017.
N. Núñez-Pérez, M. Ortíz-Barrios, S. McClean, K. SalasNavarro, G. Jimenez-Delgado and A. Castillo-Zea, “Discrete-Event Simulation to Reduce Waiting Time in Accident
and Emergency Departments: A Case Study in a District
General Clinic,” Lecture Notes in Computer Science, vol.
, pp. 352-363, 2017.
H. A. Pérez-Olivera and B. I. Villalobos-Toro, “Competitive
Analysis of the Wood and Forniture Industry of Barranquilla City,” INGE CUC, vol. 6, no. 1, pp. 195-213, 2010.
J. A. Gamez and C. Aguirre, “Management Practices and
Their Impact on Performance: Evidence From the Furniture Sector in Colombia,” in Handbook of Research on Entrepreneurial Leadership and Competitive Strategy in Family
Business, IGI Global Disseminator of Knowledge, 2019, pp.
-87.
D. Landinez-Lamadrid, D. Ramirez-Ríos, D. N. Rodado, K.
P. Negrete and J. C. Niño, “El valor de Shapley: sus algoritmos y aplicación en cadenas de suministro.,” INGE CUC,
vol. 13, no. 1, pp. 61-69, 2017.
A. Troncoso-Palacio, D. Neira-Rodado, M. Á. Ortiz-Barrios,
G. Jiménez-Delgado and H. Hernández-Palma, “Using Discrete-Event-Simulation for Improving Operational Efficiency in Laboratories: A Case Study in Pharmaceutical Industry,” Lecture Notes Computer Science LNCS, vol. 10942,
pp. 440-451, 2018.
J. D. Rodriguez and F. Tobal, “Application of lean healthcare in hospital services: a review of the literature (2007 to
,” Production, vol. 28, 16 07 2018.
R. Reyes-Mejia and A. Troncoso-Palacio, “Reducción en los
tiempos de operación en el proceso de armado de la fábrica
reyes Mejía & cia Ltda. de la ciudad de Barranquilla mediante la metodología de lean seis sigma,” 2013.
Boby John and Rajeshwar S. Kadadevaramath, “Improving
the resolution time performance of an application support
process using Six Sigma methodology,” International Journal of Lean Six Sigma, 27 02 2020.
E. Cudney, S. S. Jeemoonth Venuth, Tejaswi Materia and
Jiju Antony, “Systematic review of Lean and Six Sigma approaches in higher education,” pp. 231-244, 2018.
Narottam, Mathiyazhagan and Vikas Sharma, “Defect Reduction in Manufacturing Industry Using Lean Six Sigma
Approach,” Lecture Notes in Mechanical Engineering, pp.
-30, 2020.
H. Sodhi, D. Singh and B. Singh, “A conceptual examination of Lean, Six Sigma and Lean Six Sigma models for
managing waste in manufacturing SMEs,” World Journal
of Science, Technology and Sustainable Development, vol.
, no. 1, pp. 20-32, 2020.
P. Terán and A. Alvarado, “Mejoramiento de la competitividad en empresas PYMES del Ecuador aplicando Lean
Six Sigma: estudio de un caso,” Revista académica de la
Universidad Santa María, Campus Guayaquil, vol. 1, no. 7,
Minitab®18 Support, “support.minitab.com,” [Online].
Available: https://support.minitab.com/en-us/minitab/18/
help-and-how-to/quality-and-process-improvement/qualitytools/supporting-topics/test-for-randomness/.
Published papers are the exclusive responsibility of their authors and do not necessary reflect the opinions of the editorial committee.
IJMSOR respects the moral rights of its authors, whom must cede the editorial committee the patrimonial rights of the published material. In turn, the authors inform that the current work is unpublished and has not been previously published.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.
